1. The installation shall be carried out according to the flat plate member of the steel structure, and shall not be moved laterally or separated from the support frame after installation;
2. The support length of the two ends of the load flat steel on the support frame is not less than 25mm at each end;
3. If there is no need to move after installation, use welding to install and weld it on the bracket;
4. If it needs to be disassembled and moved after installation, it should be installed with a special installation clip;
5. Except for the mounting clips made of stainless steel, the steel mounting clips, bolts and nuts must be hot-dip galvanized surface treatment; the diameter of the bolts shall not be less than M8;
6. When installing with special mounting clips, the number of mounting clips for each steel grating shall be no less than 2.
7. The installation distance can be adjusted as the error increases. On the premise that the support length of the two ends of the load flat steel on the support frame is not less than 25mm at each end, the minimum installation distance between the steel gratings is 3 mm, and the steel grating The minimum installation distance between the grid and the adjacent structure is 10 mm.
https://www.topsteelgrating.com/
