We can choose the material of hot-dip galvanized steel grating by ourselves, including carbon steel and stainless steel, depending on the needs of our application.
Welded Carbon Hot Dip Galvanized Steel Grating
Serrated to ASTM A1011 CS Type B.
Manufacturing: ANSI/NAAMM MBG531, ASTM A123 Hot Dip Galvanized.
Panel size: 3' x 20'.
Support Rod Dimensions: 1" x 3/16" thick.
Support rod spacing/pitch 1-3/16".
Bar Size: 0.25".
Cross bar spacing/pitch 4".
Zigzag Welded Hot Dip Galvanized Steel Grating
Size: 2m×1m.
Support rod: 40×6mm.
Support rod spacing: 25 mm.
Spacing between bars: 50 mm.
Welded Hot Dip Galvanized Steel Grating HDG to AS1650
Load bar center: 22 mm.
Bearing rod section: 25×3mm, 25×3mm, 20×5mm.
Crossbar details and centres: 6 mm twisted square bars with 100 mm centres.
Finishes: HDG complies with AS1650.
Welded black (non-galvanized) grating
Welded black (non-galvanized) grid plate 6100×1000 mm (33×33 mm/30×2 mm).
Welded black (non-galvanized) grid plate 6100×1000 mm (33×33 mm/30×3 mm).
34×38 mm opening grid and welded grid in 30×2 mm support rods.
34×38 mm opening grid and welded grid in 30×3 mm support rods.
The size is 6×1m, and it can fill up to one 24-ton container (50% of each container).
Natural or galvanized finish.
Packaging: Export packaging, including fixed wood blocks (certified for sterilization) and square protection for forklift handling
https://www.topsteelgrating.com/
