1. Pressure resistance welding is preferred for welding of steel gratings, and arc welding can also be used.
2. At each intersection of the load flat steel and the cross bar, it should be fixed by welding, riveting or pressing.
3. The spacing of the load flat steel and the spacing of the cross bars can be determined by the supply and demand side according to the design requirements. As an industrial platform, it is recommended that the distance between the loaded flat bars should not be greater than 40mm, and the distance between the horizontal bars should not be greater than 165mm.
4. The pressure lock of the steel grating can be fixed by pressing the cross bar into the load flat steel by a press.
5. The steel grating should be processed into shapes of various sizes according to the needs of users.
https://www.topsteelgrating.com/
